Reviewed and signed off by Lyman Marshall Surveyors, Director, Surveyor and RICS Registered Valuer at Lyman Marshall Chartered Surveyors. Published 12 November 2026 · Updated 12 November 2026
If you are weighing up radon when buying a house in Lincoln, start with this: since September 2024, City of Lincoln Council has issued more than 400 radon testing kits to council homes in parts of the city identified as having higher radon levels, following updated national mapping by the UK Health Security Agency. If a council landlord is testing its own stock in Lincoln, buyers in the same streets should at least be asking the question.
Radon is one of the few property risks you cannot see, smell or spot on a viewing. This guide explains what a radon finding in a house survey actually means, what your surveyor can and cannot tell you, and the practical steps to take before you exchange.
Quick answer: A RICS home survey will flag radon as a risk where a property is in a radon Affected Area, but no surveyor can measure the level on a single visit. The only way to know is a three-month test with two detectors. If the seller has no test result, most buyers agree a retention with their solicitor and test after moving in.
What radon is, and why it matters in a house purchase
Radon is a colourless, odourless radioactive gas formed naturally from the small amounts of uranium in all rocks and soils. Outdoors it disperses harmlessly. Indoors, it can build up, because buildings draw air in from the ground through gaps in floors.
The health concern is lung cancer. According to the government’s UK National Radon Action Plan, indoor radon is responsible for an estimated 1,100 lung cancer deaths each year in the UK, with smokers and ex-smokers at the greatest individual risk.
Two numbers are worth knowing. The UK Action Level for homes is 200 becquerels per cubic metre (Bq/m³), measured as an annual average. UKHSA also sets a Target Level of 100 Bq/m³ as the ideal outcome of any reduction work. A radon Affected Area is one where at least 1% of homes are expected to be above the Action Level.
That last definition matters. Being in an Affected Area does not mean a house has high radon. It means the chance is high enough that testing is recommended.
Is radon an issue in Lincolnshire and Nottinghamshire?
In parts of our area, yes. The underlying geology is what matters, and it changes over short distances.
City of Lincoln Council states that some areas in Lincoln have been identified by UKHSA as radon Affected Areas, and it now runs a testing and remediation programme for its own homes.
Across the county boundary, Newark and Sherwood District Council lists radon-affected parts of the district that include parts of Southwell, Farnsfield, Lowdham, Balderton and a number of surrounding villages. The council also notes that only a small percentage of homes in those areas are at or above the Action Level.
Large parts of low-lying Lincolnshire sit outside Affected Areas altogether. The point is not that the whole region is high risk. It is that the answer varies street by street, so it has to be checked for the specific address.

Radon and your house survey: what the surveyor can and cannot tell you
This is where many buyers expect more than a survey can deliver. The RICS Home Survey Standard includes radon among the environmental matters a residential survey should consider, and lists high radon levels among the risks to occupants a surveyor should be aware of.
In practice, on a RICS Level 2 survey or a Level 3 building survey, that means:
- Flagging the risk. If publicly available information shows the property is in a radon Affected Area, the report says so and explains what to do next.
- Looking for existing protection. A radon sump pipe, an extract fan, a positive ventilation unit in the loft, or improved underfloor ventilation are all visible clues that radon has been dealt with before.
- Noting higher-risk spaces. Cellars and basements used as living space deserve particular attention, wherever the property is.
- Directing questions to your solicitor. Whether a test was done, and its result, is a legal enquiry, not something a surveyor can confirm on site.
What a surveyor cannot do is tell you the radon level. Radon varies from day to day with the weather and the way a house is used. The Action Level refers to an annual average. A single reading on survey day, even with specialist equipment, would not tell you whether the home is above or below it.
Here is what most online advice gets wrong: it treats a radon flag in a survey as either a verdict or a reason to walk away. It is neither. It is a prompt to get one specific piece of evidence before you exchange.
Radon in the conveyancing process
Radon already appears in the paperwork, which is why it often surfaces first through your solicitor rather than your surveyor. The National Radon Action Plan confirms that radon is covered through the local authority search (CON29) and the seller’s Property Information Form (TA6).
The TA6 asks the seller whether a radon test has been carried out, whether the result was below the recommended Action Level, and whether radon protection was installed when the property was built. The local search tells you whether the address is in an Affected Area.
If both come back clear, there is usually nothing more to do. If the property is in an Affected Area, the next step depends on whether a test result exists.

Dealing with radon when buying a house: a step-by-step plan
- Confirm the status of the address. Your local search will show it, and your surveyor should flag it. Do not rely on the postcode or the town name.
- Ask for the seller’s test result. A valid result comes from a three-month test using two detectors, one in the main living area and one in an occupied bedroom, analysed by a validated laboratory.
- If the result is below 200 Bq/m³, keep a copy with your property records. That is normally the end of it.
- If the result is above 200 Bq/m³, ask what was done about it and whether there has been a re-test since. A working sump or ventilation system with a later clear result is reassuring.
- If there is no test, discuss a retention with your solicitor before exchange and arrange a test when you move in.
How a radon retention works
A retention is a sum held back from the purchase price, usually by one of the solicitors, to cover remedial work if a test after completion shows high radon. UKHSA’s guidance describes the money being held for around six months. That allows time to move in, run the three-month test and receive the result.
If the result is below the Action Level, the money goes to the seller. If it is higher, it pays for remedial work, with any surplus returned to the seller. UKHSA’s published guidance puts a typical retention at between £800 and £3,000.
A retention may not suit every purchase. If you plan major building work straight after moving in, or will not be living there for a while, the test result will be less reliable. Say so to your solicitor early, because it changes what you should negotiate.
Reducing radon: what the work usually involves
High radon is one of the more fixable problems a survey can raise. The main methods are:
| Method | How it works | Usually suits |
|---|---|---|
| Radon sump with fan | A small chamber under the floor, with a pipe and fan drawing radon out before it enters the house | Solid floors; generally the most effective option |
| Positive ventilation | A quiet fan blows fresh air, usually from the roof space, into the house | Lower readings, on solid or suspended floors |
| Underfloor ventilation | More or clearer air bricks, or a fan, to ventilate the void under a suspended timber floor | Suspended ground floors |
Any system should be followed by a repeat test to confirm it has worked. Sealing gaps and improving general ventilation help, but UKHSA’s guidance is that they do not reduce radon levels on their own.
What about new build homes?
New homes and extensions built in higher-radon areas must include radon protection under the Building Regulations. That can be a radon-proof barrier across the ground floor on its own (“basic” protection) or a barrier plus a capped sump that can be activated later (“full” protection).
Protection does not guarantee a low level. The National Radon Action Plan notes that radon can still be elevated in homes built with protection, which is why new occupiers are advised to test. If you are buying a new build in an Affected Area, ask the developer which level of protection was installed. Include it on your new build snagging checklist, and test during your first year.
Timing: fitting radon into your purchase
Radon questions are simplest to resolve before exchange, when the price and terms are still open. After exchange, you are committed, and a retention can no longer be negotiated.
The survey is often where the issue first becomes visible, so book it early. Our guide to how long after a survey you can exchange contracts explains how to leave enough time for questions like this to be answered properly.
Radon and house surveys: frequently asked questions
Does a house survey test for radon?
No. A RICS Level 2 or Level 3 survey flags radon as a risk where the property is in an Affected Area and looks for signs of existing protection, but it does not measure radon. Measurement needs a three-month test with two detectors.
Should I buy a house in a radon Affected Area?
Being in an Affected Area only means at least 1% of homes there are expected to be above the Action Level. Many homes in those areas are below it, and high levels can usually be reduced. Get the seller’s test result, or agree a retention and test after you move in.
What is a safe level of radon in a house?
UKHSA advises reducing radon where the annual average is above the Action Level of 200 Bq/m³, and considering reduction between 100 and 200 Bq/m³, particularly where there is a smoker or ex-smoker in the home.
How long does a radon test take?
A standard home test runs for three months, with one detector in the living area and one in an occupied bedroom, because radon levels vary with the weather and the way the house is used. Shorter tests are less reliable.
Buying in Lincoln, Lincolnshire or Nottinghamshire?
Our RICS surveys flag radon and other environmental risks in plain English, with clear next steps for you and your solicitor. For older or larger homes, a Level 3 building survey gives the most detail.
Get a fixed survey quote or call 01522 438989.



